Notes during the centrifugal fan operation

Matters need attention during the fan working---by Xianrun Blower

cement plant centrifugal fan

1. If the air flow is too big to conform to the requirements, or need smaller flow in a short period of time, all these can be adjusted by throttling gear. 

2. Check the thermometer and oil sensitivity regularly, and control bearing box oil level within allowable scope. 

3. Check immediately for any abnormal phenomenon during the centrifugal fan running or stop. 

4. For the small fault, find out the reason, try to eliminate or processing in time; if the small fault can not be eliminated, or find out big failure, should be checked immediately.

5. Lubricating oil should be changed after repairing, and lubricating oil also should be changed regularly. 

6. Check bearing pedestal of E mode driving regularly (quarterly), cleaning and adding lubricating oil, in case of bearing burning out.

E mode driving mode centrifugal fan