显示标签为“industrial fans and blowers”的博文。显示所有博文
显示标签为“industrial fans and blowers”的博文。显示所有博文

2017年2月28日星期二

High Temperature Centrifugal Fan by Xianrun Blower

High Temperature Centrifugal Fan by Xianrun Blower

The high-temperature centrifugal fan consists of the motor, the variable speed device, the centrifugal fan body, the inlet flow control device, the slow-moving device and lubrication system.

1. the motor: generally, it is high temperature motor.
2. the variable speed device: generally, using hydraulic coupling, SCR cascade frequency control and frequency control, speed ratio is more than 2: 1.
High Temperature Fan for Cement Rotary Kilns
3. the centrifugal fan body: mainly includes the rotor group (mainshaft, impeller), casing and air inlet. The rotor is key component of centrifugal fan, so it must be processed with non-destructive inspection strictly and high-precision dynamic balance test to ensure the centrifugal fan smooth operation.

4. inlet flow control device: controlling the airflow by the adjusting door and electric actuator.
5. slow-moving device: composed of motor and high-speed ratio gear box, to ensure the rotor won't bend when the high-temperature fan stop operation.
High Temperature Fan for Cement Rotary Kilns

2017年2月13日星期一

Centrifugal Fan Selection Matters Need Attention by Xianrun Blower---Part 2

Centrifugal Fan Selection Matters Need Attention by Xianrun Blower


5. In the centrifugal fan selection, the most important is long-term economic operation quality and efficiency, other than one-time investment. 

6. In the centrifugal fan selection, be seriously compared with each other, give preference to higher efficiency, samller size, lighter weight, larger adjusting range one. 
High Quality ID Fan for Ventilation
7. For the frequency conversion centrifugal fan, please note that the system calculated total pressure losses are rated pressure, and centrifugal fan power needs to append 15%~20% on calculated value. 

8. Pay attention to the matching relation of pipe system resistant characteristics and centrifugal fan characteristics. For stable operation, centrifugal fan needs to work around the highest efficiency point, and the working point is right of the pressure peak point in the performance curve (in larger airflow side, in general, the working pressure is 80% of pressure peak point). 

Centrifugal fan design point efficiency should not be less than 90% of the highest efficiency. 
High Temperature Fan for Cement Rotary Kilns
9. For more than one centrifugal blowers working in parallel or in series, it is better to select the same model centrifugal fans. 

2017年1月11日星期三

Abandoned Power Plant Becoming Science Fiction Movies Location by Xianrun Blower

Abandoned Power Plant Becoming Science Fiction Movies Location by Xianrun Blower

Custom Heavy Duty Industry Fans for Power Plant
This coal fired power plant came into use since the year of 1920, owned by Exelon Generation, one energy company. In 1985, after working 65 years, the power plant was out of service. And the waste machines in this power plant got rusty heavily, so there was a special beauty in this power plant. 
Custom Heavy Duty Industry Fans for Power Plant
This power plant was established after World War I. At first, it was a shipyard in 19 century, covering about 16 acre (About 6.5 hektare), part buildings under the water. Main buildings included several large sky window, 350 thousand square foot (about 0.3 hektare), and 55 foot (about 16.7 meter) height ceiling, this power plant looked most magnificent. 
High Capacity Double Suction Fans for Power Plant
Although this place was very old and shabby, Bart Blatstein and Joseph Volpe were still willing to pay about 3 million USD to buy this waste power plant, which included 1000 foot (about 300 meter) river and wharf. The two buyers planed to develop this place to hotel, banquet hall and restaurant. 
High Capacity Double Suction Fans for Power Plant

2017年1月8日星期日

Abandoned Power Plant Becoming Science Fiction Movies Location by Xianrun Blower

Abandoned Power Plant Becoming Science Fiction Movies Location by Xianrun Blower

New Design FD Fans for Boilers
According to Daily Mail reported, Bob Thissen, a photographer based in Netherlands, took the pictures of abandoned power plant inner scene, which is located in Philadelphia, America. 
New Design FD Fans for Boilers
Since the power plant shut down 30 years ago, many film makers were attracted to this place by its reputation as a scenic location, and many movies were shooted in this rusting power plant, such as Transformers, Twelve Monkeys, The Last Airbender by M. Night Shyamalan. 
High Capacity Double Suction Fans for Power Plant

2017年1月4日星期三

Xianrun Blower Cement Kiln High Temperature Centrifugal Fan

Xianrun Blower Cement Kiln High Temperature Centrifugal Fan

The Reason of Centrifugal Fan Impeller Ash Deposition


The main reason of the centrifugal fan impeller ash deposition is that, when the waste exhaust flow through the impeller, a large number of fine dust particles collide with impeller non-working surface and blade trailing edge near the working face in impeller, then deposite in the centrifugal fan impeller; what's more, dust particles are more sticky under high temperature, so the deposition chance increase. 
High Temperature Fan for Cement Rotary Kilns

Thus, the waste exhaust gas temperature and airflow speed play an important role in the ash deposition process, when the exhaust temperature of the cement kiln preheater reach over 300 centigrade degrees, then high temperature centrifugal fan will begin to happen dust deposition and crust frequently.
High Temperature Fan for Cement Rotary Kilns

2016年11月27日星期日

Venturi Scrubber Dust Collector Centrifugal Fan by Xianrun Blower

Venturi Scrubber Dust Collector Centrifugal Fan by Xianrun Blower

The venturi scrubber is mainly composed of venturi tube (shrink tube, throat pipe, expanding tube) and the cyclone separator, centrifugal fan. 
Custom heavy Duty Industry Fan from China Supplier
Working principle of venturi scrubber dust collector: dusty gas enters into the shrink tube, then the flow speed increases gradually along the pipe; water or other liquid are ejected by the throat pipe, struck by high-speed airflow and atomization; dust particles in the gas contact with liquid drops and lubricate; after entering expanding pipe, the flow speed decreases gradually; the dust particles are bonded to each other; the particles volume increase and easy to remove; then, the gas enters the cyclone separator, due to the centrifugal force, water and dust particles are thrown to the separator wall and outflow cyclone separator; finally, the purified gas is exhausted out by centrifugal fan. 
Large Airflow Backward Curved Fans
The advantage: simple structure, high dusting efficiency, good cooling effect. 
The disadvantage: big resistance, just used for wet-type dust collecting.
High Quality ID Fan for Ventilation

2016年11月23日星期三

Spray Tower Scrubber Centrifugal Fan by Xianrun Blower

Spray Tower Scrubber Centrifugal Fan by Xianrun Blower

Spray Tower Scrubber Working Principle: 

In the counter-current spray tower, dusty gas moves upward by centrifugal fan, the droplets by nozzle make downward movement. Because of inertia collision, intercept, cohesion functions between droplets and dust particles, the larger particles are collected by the droplets. 
High Temperature Fan For Metallurgical Factory

Spray Tower Scrubber Features:

1. It uses packed tower to purify the waste gas, and is suitable for continuous or intermittent dusty gas discharge. 
2. Spray tower scrubber has the features of simple structure, small pressure loss, stable operation, high efficiency, etc.
3. Wide application, and can purify a variety of pollutants and dusty gas.
Custom heavy Duty Industry Fan from China Supplier

Spray Tower Scrubber Application:

In chemical industry, electronics industry, metallurgic industry, electroplating industry, textile factory, food plant, and so on, it can purify and collect acid waste gas, alkaline waste gas, dusty gas in the processing. 
Large Airflow Backward Curved Fans

2016年11月22日星期二

Wet-Type Impingement Dust Collector Centrifugal Fan by Xianrun Blower

Wet-Type Impingement Dust Collector Centrifugal Fan by Xianrun Blower

Impingement wet dust collector is used for high humidity, big discharge, large dust content industrial waste gas, especially suitable to purify the fibrous, non-corrosive, and temperature less than 300 centigrade dusty gas. The impingement wet dust collector has good effect in the dust system of sticky quick lime transportation. 
High Temperature Fans for Dust Collecting
The smoke exhausting from boiler by centrifugal fan enters into the dust collector, impacts the water at high speed, most dust particles stay in the water due to the weight increase or sticking to water, this is impingement stage. 

At this time, because of the gas movement, the water form a parabola-shape drop, spray, and bubble area, then the dusty gas is purified further in this area, and this is a water bath stage. 
Large Airflow Backward Curved Fans

What is more, when the high temperature gas enters into the dust collector, the water and gas will form water spray, the dust particles change flow direction, further purification when moving forward, this stage is nebulization dust collector.

Through the above three ways purification, clean gas from dust collector flow to the chimney.
High Quality ID Fan for Ventilation

2016年11月21日星期一

Gravitational Dust Collector Centrifugal Fan by Xianrun Blower

Gravitational Dust Collector Centrifugal Fan by Xianrun Blower

Dust removal principle: the centrifugal fans of gravitational dust collector reduce gas speed and change flow direction suddenly; larger dust particles separate from gas under the function of gravity and inertia force; settle to the dust collector cone bottom.
Industrial Exhaust Fans
The gravitational dust collector belongs to the coarse dust removal. There is intercepter valve in gravity precipitator upper part, ash discharging gear in gravity precipitator bottom part. Gravity dust collector is according to dust gravity sedimentation, to separate dust from the dirty gas.
Custom heavy Duty Industry Fan from China Supplier
The process is that the gas enters into dust collector from the horizontal direction, under the gravity force, dust particles settling down gradually, and gas moving forward along the horizontal direction by centrifugal fan, the smaller dust particles settling down, so as to achieve dust collecting aim.
Custom heavy Duty Industry Fan from China Supplier

2016年11月17日星期四

Xianrun Blower Centrifugal Fan for Inertial Dust Separator

Xianrun Blower Centrifugal Fan for Inertial Dust Separator

Inertial dust separator is also called idle type dust chamber. Because the dust and gas in the air movement have different inertia force,the dusty gas collides baffle and dramatically changes the airflow direction, separating and collecting dust by inertia force according to motion trail.
Custom heavy Duty Industry Fan from China Supplier
Inertial dust separator has two kinds, collision type and rotary type. The former is install one baffle or multichannel baffle along the flow direction, dusty air collides the baffle, then dust particles separate from the gas.

Obviously, the higher speed of the dusty gas before collision the baffle, the lower speed after collision, the less dust, higher dust removal efficiency is higher. 
The latter is that the dusty gas changes flow direction for many times, then separate dust in steering process.The smaller curvature radius of gas, the more steering speed, the higher dust removal efficiency.
Large Airflow Backward Curved Fans
This inertial dust separator has simple structure, low resistance, and is suitable for dry big dust particles. 
Industrial Exhaust Fans

2016年11月16日星期三

Single Dust Collector Centrifugal Fan by Xianrun Blower

Single Dust Collector Centrifugal Fan by Xianrun Blower

Single Dust Collector Working Principle:

Dusty gas enters into the chambers; filtrated by flat bag, intercepted on bag filter surface, purified gas through the bag; exhausted out by the centrifugal fan directly.

3000 cfm Industrial Backward Fans for Factory
With the filtering time increasing, dust accumulated on the bag filter surface is more and more, bag resistance also increases accordingly, which affect the dust collection efficiency. 
At this time, starting shaking devices to shake off the dust, the the dust falls over the drawers and is pulled by manpower.

3000 cfm Industrial Backward Fans for Factory

Single Bag Filter Dust Collector Application and Features: 

The single dust collector is designed for cement plant silo top, and bottom, belt conveyor, part dust source removal, and other industries. 

The single dust collector has the features of small volume, large airflow, compact structure, convenient and reliable operation, etc.
High Quality ID Fan for Ventilation

2016年11月10日星期四

Bag Dust Collector Centrifugal Fan by Xianrun Blower

Bag Dust Collector Centrifugal Fan by Xianrun Blower

Dust collector is mainly composed of upper box, middle box, air inlet pipe, ash bucket, centrifugal fan, filter bag, discharge device, etc. 
Industrial Exhaust Fans
Bag dust collector working principle: dusty gas enters into filter chamber from bottom open flange; coarser particles drop into ash bin directly; dusty gas is filtrated by the bag filter; dust is retained in bag, pure air go to the gas chamber, exhausting out by centrifugal fan.

Custom heavy Duty Industry Fan from China Supplier
When the dust on the bag filter surface increases, the equipment resistant reach the definitive pressure, programmer controller begins to work, then open pulse valve one by one. The compressed air from centrifugal fan blow and clean the dust bag through the spout; filter bag balloons suddenly; under the action of reverse flow, the dust breaking away from filter bag and drops to ash bin quickly, finally, the dust is discharged by cindervalve. 

High Pressure Blowers for Smelting Furnace
This type bag dust collector is widely applied in metallurgy, casting, building material, mining, and chemical industry, etc.

2016年11月9日星期三

Cement Raw Material Mill Recirculation Fan by Xianrun Blower

Cement Raw Material Mill Recirculation Fan by Xianrun Blower

Raw material mill recirculation fan plays a big role in cement raw material mill system, it can control the following parameters of mill system by adjusting the circulation fan:
Industrial Fans and Blowers for Cement Plant
1. Airflow in raw material mill: vertical mill is swept by the wind, so needs appropriate air volume. If air flow is insufficient, qualified raw material can not be taken out by recirculation centrifugal fan timely; material layer thickness will increase; slag discharge quantity increase; equipment load is high; so output decrease. While if the air volume is too large, material layer thickness will be too thin to influence the raw material mill the stability operation. 
Industrial Fans and Blowers for Cement Plant
2. Material layer thickness: material bed stable operation is important to vertical mill stable operation. Only material layer is stable, air volume, air pressure and feeding volume can be stable. Otherwise it needs to adjust airflow and feeding volume to maintain material thickness. Improper adjustment will cause shock, motor load rise or system tripping, etc. 
3. Mill vibration: vibration is ubiquitous in ring-roller mill working, if the vibration is too large, will cause mechanical damage of mill plates, roller and lining plate. 
Industrial Fans and Blowers for Cement Plant
4. Pressure difference in mill: pressure difference refers to the pressure loss in centrifugal fan vane. During mill operation, grinding mill load has changes, not only on the electric current, material thickness, and vibration amplitude, but also the pressure difference. 
5. Mill outlet temperature: recirculation centrifugal fan can control outlet temperature effectively, what is more, it can keep good drying and grinding operation conditions. 
6. Product fineness: recirculation centrifugal fan air volume also has a certain influence on the size of the fineness. 

2016年11月8日星期二

Cement Rotary Kiln High Temperature Centrifugal Fan by Xianrun Blower

Cement Rotary Kiln High Temperature Centrifugal Fan by Xianrun Blower 

Cement rotary kiln is cylinder shape with a certain slope, the material after preheater from kiln tail to rotary kiln, and promote material stirring in rotary kiln with the help of rotation.
So the material can mix with each other, reaction, depending on the slope of the kiln cylinder and rotation, the material move forward in the rotary kiln.
High Temperature Fan for Cement Rotary Kilns
The waste hot air produced by burning in kiln, under the function of high temperature centrifugal fan, preheat raw material before enter into rotary kiln by preheater, 
then the waste air after cooling is exhausted again by high temperature centrifugal fan and make waste gas treatment (dust collecting and exhausting out). 

The raw material after preheating is calcined into mature material in rotary kiln. Rotary kiln need appropriate pressure and temperature, to make the pulverized coal have suspension time to make sufficient burning, so raw material will achieve a good heat treatment in the cement rotary kiln.
Cement Kiln Cylinder Cooling Fan
The pressure changes frequently because of material accumulation in cement rotary kiln. In this case, on the one hand, the high temperature fans need to adjust the furnace pressure, on the other hand, the waste air from cement rotary kiln calcination have dust, the high temperature fans as ID fan, exhausted the dirty waste gas to dust collector, then exhaust away again.
High Pressure Blowers for Smelting Furnace

2016年11月7日星期一

Glass Tempering Furnace Fans And Blower by Xianrun Blower

Glass Tempering Furnace Fans And Blower by Xianrun Blower

Glass Tempering Furnace Energy Saving Forecast:

(1) When the speed is reduced to 85% of the rated speed (the air volume will be reduced to 85% of the rated air volume), then the motor shaft power will be reduced to 61% of the rated power;       
(2) When the glass tempering furnace is in standby mode, the centrifugal fan speed is reduced to 20% of the rated speed, then the motor shaft power is about 0.008% of the rated power. Thus, centrifugal fans with frequency control have obvious energy-saving effect.
Heat-Resistant ID Fans for Glass Production Line

Variable Frequency Speed Regulation Fans and Blowers Energy Saving Principle:

(1) When the air demand is less than the rated air volume, that is to say, the motor works under rated speed, then reduce the fan speed can adjust the fan airflow easily.
(2) With the reduction of the fan rotation speed, the motor shaft power decreases, then electric power consumption reduces.
(3) Therefore, using variable frequency speed control technology to replace shutter valve have significant energy saving effect.
New Design Radial Fan

Glass Tempering Process and Technique:

(1) Firstly, send the normal glass to reciprocating heating furnace, when the glass is heated to softening point, then make rapid quenching to complete the glass tempering.
(2) Quenching air is from 250 kw centrifugal fan.
(3) According to different glass thickness and parameters in control system, the 
centrifugal fan will produce different airflow to cooling and quenching on positive and negative of glass evenly.
(4) The glass after tempering and quenching, forms compressed stress in surface, so when the glasses under external force, it can counteract the surface stress firstly, so as to improve the bearing capacity and improve vitreous tensile strength.
High Temperature Fan For Metallurgical Factory

2016年11月6日星期日

Industrial Fans And Blowers Application in Tempered Glass Production Line By Xianrun Blower

Industrial Fans And Blowers Application in Tempered Glass Production Line By Xianrun Blower

Tempered glass is the secondary processed product of plate glass, tempered glass production line mainly includes loading platform, heating furnace, flat quench and unloading platform, plus industrial fans and blowers, air bellow, air duct, electric control system and computer terminals and other auxiliary facilities. 

The original glass enters the heating furnace from loading platform, after heating to the appropriate tempered temperature, then the glass is sent into flat quench for rapidly even quenching, finally enter the unloading platform. 

The function of centrifugal fans in tempered glass production line is supply enough air to cooling the glass from heating furnace to flat quench by conveyor belt. The flat quench is divided into rapid cooling section (high pressure area) and cooling section (low pressure area), and the air is provided by high pressure blower and low pressure blower.


2016年11月4日星期五

Large Centrifugal Fan Installation and Inspection by Xianrun Blower

Large Centrifugal Fan Installation and Inspection by Xianrun Blower

When the large centrifugal fans finish the installation, make the inspection before test running, these industrial fans and blowers can not operation until reach the requirements. 
Custom Heavy Duty Industry Fans for Power Plant
A. Check whether the large centrifugal fan assembly is in meeting the drawing and specification requirements, there should not be any sundries ( open the access door on the air inlet or soot cleaning door in the casing), clean the sundries and setting tools around the large centrifugal fan. 
Large Capacity Industrial Radial Fans
B. Check whether all the connecting bolts and binding bolts are tight. 
C. Check whether all electrical equipment are installed by the requirements; wirings are correct; the instrument and apparatus are in good condition.
High Capacity Double Suction Fans for Power Plant
D. Check whether the oil system is smooth. 
E. Test running the main motor, hydraulic coupling, dilute gas station, etc. independently, after confirming all parts can work normally, then the whole unit centrifugal fan test run.