Xianrun Blower 4 High Pressure Blowers Complete Production and Ready to Shipping

Xianrun Blower 4 High Pressure Blowers Complete Production and Ready to Shipping

The old customer from Belarus ever bought 6 high pressure blowers last year,  and he was so satisfied with those blowers that introduced our company ( Xianrun Blower: Henan Xianrun International Trade Co.,Ltd ) to his friends.

High Pressure Blowers for Forging Furnace

The order from his friends for another 4 sets high pressure blowers, 7 working days production time, heat treatment impellers, after relieving stress, balance calibration, performance inspection, standard export package, custom suffocating free, and they are ready to shipping to port.

High Pressure Blowers for Industrial Boilers

The 4 High Pressure Blower Parameters 

Airflow: 700/1200/1400/1500 m3/h
Air Pressure: 6000 Pa
Power: 5.5/5.5/7.5/7.5 kw
Air temperature: 20 Centigrade
Speed: 2900 rpm
Outlet Angle: Left 45 /Right 45/Left 90/Right 90

High Pressure Blowers for Industrial Boilers

High Pressure Blower Features by Xianrun Blower

High Pressure Blower Features by Xianrun Blower

1. The high pressure blower is dual-purpose, with suction and blowing function, so it can be exhaust fan, can also be blast blower;

2. Green environmental protection, this high pressure blower operate under low oil or without oil, the output air is clean;

High Pressure Blowers for Industrial Boilers

3. Compared with general centrifugal fan, the pressure of high pressure blower is more than ten times higher, with much higher efficiency;

4. The pump body material is fully aluminum alloy with whole die-casting, patent, fashion, simple and laconic;

High Pressure Blowers for Forging Furnace

5. Simple and convenient installation , even if there is no fixed foot pedestal, the high pressure blower can also operate, greatly saving installation cost and time;

6. During the working, the high pressure blower has very small noise;

7. Wear light, nearly free maintenance;

8. Long service life, under normal usage, it can working at least 5 years. 

High Pressure Blowers for Smelting Furnace

Working Principle of High Pressure Blower by Xianrun Blower

In the designing, when the air pressure is between 30 KPA~200 KPA, this fan belongs to high pressure fan. Also called high pressure blower, it is different from general centrifugal fan. 

High Pressure Blowers for Smelting Furnace

When the impeller rotates, due to the centrifugal force, air move to outward and forward, thus forming a series of spiral movement. Air between the impeller blades spiraling rotates accelerately and pile the outside gas into side slot, after the air entering the side channel, it is compressed, then the air return to impeller blades and rotates accelerately again. 
 

High Pressure Blowers for Smelting Furnace

When the air moves along a spiral orbit and go through the impeller and the side channel, every impeller blade increases the degree of compression and acceleration. With the rotation, the kinetic energy of the gas increasing, the air pressure along the side of the channel increase further. When the air reach to the connection between side channel discharge and flange, the air is squeeze out of the blades and exhausted out of pump through the muffler.

XIANRUN BLOWER HIGH PRESSURE BLOWER